This high-grade Nylon Stock Sheet is engineered for superior performance in lubricating applications. Its robust material composition and precise dimensions ensure reliable operation and extended service life in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.469" |
| Length | 45" |
| Width | 22" |
Built to exacting engineering tolerances, this Nylon Stock Sheet boasts a nominal thickness of 0.469 inches, a length of 45 inches, and a width of 22 inches. Composed of high-density Nylon, it exhibits exceptional self-lubricating properties, low coefficient of friction, and excellent wear resistance, making it ideal for sliding components, bearings, and wear pads. Its inherent toughness and ability to withstand significant mechanical stress further contribute to its suitability in various industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Precisely cut the nylon sheet to the required dimensions using appropriate tooling. 3. Securely fasten the nylon component to the substrate using mechanically sound fasteners or adhesives compatible with nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to stress concentrations. | Utilize sharp, carbide-tipped tools and a slow, controlled feed rate during cutting to prevent chipping and stress risers. |
| Over-tightening fasteners, causing deformation. | Employ washers and tighten fasteners incrementally to the specified torque, avoiding excessive pressure that could distort the nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Self-lubricating bearings, Chute liners and slide surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||