This 0.014-inch thick Nylon stock sheet, measuring 22 by 19 inches, is a versatile raw material engineered for demanding industrial environments. Its robust properties ensure superior performance and longevity in critical applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.014" |
| Length | 22" |
| Width | 19" |
Built to exacting engineering tolerances, this Nylon stock sheet offers a precise thickness of 0.014 inches, a length of 22 inches, and a width of 19 inches. Composed of high-grade Nylon, it exhibits exceptional tensile strength, abrasion resistance, and low friction characteristics. This material is ideal for fabrication of components requiring high wear resistance, insulation, and impact absorption, commonly utilized in mechanical assemblies, protective coverings, and specialized tooling where dimensional stability and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Carefully measure and mark the desired dimensions on the Nylon stock sheet. 3. Utilize appropriate cutting tools, such as a sharp utility knife or industrial shear, for precise cuts. Ensure blades are maintained for clean edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, resulting in rough or torn edges. | Employ sharp, high-quality cutting blades and replace them regularly to ensure clean, precise cuts. |
| Overheating the Nylon during cutting, leading to melting or deformation. | Use a consistent, moderate cutting speed and pressure. For power cutting tools, ensure appropriate blade speed is selected for Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Gaskets and Seals, Wear Strips and Bushings, Electrical Insulation Components, Protective Covers and Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||