This high-performance Nylon stock sheet offers exceptional strength, rigidity, and wear resistance. Its robust material properties make it ideal for fabrication and replacement parts in demanding industrial settings.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.129" |
| Length | 20" |
| Width | 16" |
Designed for demanding industrial environments, this Nylon stock sheet features a precise thickness of 0.129 inches, a length of 20 inches, and a width of 16 inches. Fabricated from high-grade Nylon, it exhibits superior tensile strength, excellent abrasion resistance, and good chemical inertness. This makes it an optimal choice for components requiring durability under stress, friction, and exposure to various industrial fluids. Applications include wear pads, bushings, gears, and custom-machined parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Prepare surfaces for bonding or fastening according to design specifications. 3. Install the fabricated Nylon component, ensuring proper alignment and secure fastening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ sharp, carbide-tipped cutting tools specifically designed for machining Nylon to achieve clean cuts and prevent thermal damage. |
| Over-tightening fasteners, which can cause stress cracking or deformation of the Nylon. | Use torque-limiting tools and appropriate washers to distribute load and prevent excessive pressure on the Nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Gears and Sprockets, Custom Machined Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||