This 0.076" thick Nylon stock sheet offers exceptional strength and flexibility, ideal for custom fabricating components in suspending and bracing applications across diverse industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.076" |
| Length | 33" |
| Width | 35" |
Trusted by engineers across multiple sectors, this Nylon stock sheet measures 0.076 inches in thickness, with a substantial 33-inch length and 35-inch width. Constructed from high-grade Nylon, it exhibits superior tensile strength, excellent abrasion resistance, and good chemical inertness, making it suitable for demanding environments. Its dielectric properties also offer an advantage in electrical insulation applications. This material is easily machined and formed, allowing for precise customization in supporting, aligning, and securing various components in mechanical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Drill mounting holes or slots as per the design specifications. 3. Secure the fabricated Nylon component using suitable fasteners and hardware.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material delamination or rough edges. | Utilize sharp, high-speed steel or carbide cutting tools specifically designed for plastics to ensure clean cuts and smooth edges. |
| Over-tightening fasteners, which can cause stress concentrations and potential cracking of the Nylon. | Apply appropriate torque when fastening. Consider using washers to distribute load and prevent localized pressure. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Brackets and Mounts, Cable Management Solutions, Insulating Barriers and Supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||