This high-performance Nylon stock sheet, engineered for pneumatic applications, offers exceptional durability and resistance to wear. Its robust material properties ensure reliability in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.836" |
| Length | 41" |
| Width | 39" |
Specified by design engineers worldwide, this Nylon stock sheet (0.836" thickness, 41" length, 39" width) provides superior mechanical strength and abrasion resistance, crucial for pneumatic components. Its excellent dielectric properties and low friction coefficient make it ideal for seals, bearings, and housings in high-pressure systems, ensuring longevity and efficient operation. The material's inherent toughness mitigates the risk of premature failure under repeated stress cycles.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate industrial cutting tools. 2. Machine to final part specifications, adhering to tight tolerances. 3. Install components, ensuring proper seating and sealing as per system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard machining practices without considering Nylon's thermal expansion properties. | Account for Nylon's thermal expansion during machining by using coolant and adjusting cutting speeds and feeds accordingly. |
| Improperly selecting fasteners or adhesives that are incompatible with Nylon. | Utilize fasteners and adhesives specifically rated for use with Nylon to prevent material degradation or failure. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder components, Seals and O-rings for fluid power systems, Bearings and bushings in automated machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||