This robust Nylon stock sheet offers exceptional wear resistance and mechanical strength. Precisely manufactured to 0.057" thickness, 24" width, and 36" length, it's ideal for custom fabrication and demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.057" |
| Length | 36" |
| Width | 24" |
Engineered for reliability and performance, this Nylon stock sheet boasts a precise 0.057" thickness, ensuring consistent material behavior in critical applications. Its substantial 24" width and 36" length provide ample material for various fabrication needs, from intricate components to larger structural elements. Nylon's inherent properties, including excellent abrasion resistance, low coefficient of friction, and good impact strength, make this sheet suitable for gears, bearings, wear pads, and custom tooling where durability and reduced friction are paramount. The material's machinability allows for precise contouring and feature creation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired cut lines on the nylon sheet. 2. Utilize a suitable saw blade (e.g., fine-tooth carbide) for clean, chip-free cuts. 3. Ensure proper workpiece support during cutting to prevent vibration and ensure dimensional accuracy.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incorrect saw blade for nylon, leading to melting or chipping. | Employ a sharp, fine-tooth carbide blade designed for plastics. Maintain a moderate cutting speed. |
| Inadequate workpiece support during sawing, causing blade wander and inaccurate cuts. | Secure the nylon sheet firmly with clamps or a zero-insertion force vise, ensuring full contact with the cutting surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guide rails, Custom gears and sprockets, Bushings and bearings, Prototyping and component fabrication, Chute liners and impact plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||