This premium Nylon stock sheet offers exceptional durability and performance. Its robust material properties make it ideal for a wide range of demanding industrial applications requiring strength and wear resistance.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.114" |
| Length | 45" |
| Width | 27" |
Manufactured under strict quality controls, this Nylon stock sheet exhibits superior mechanical strength and abrasion resistance. The material's inherent toughness and low coefficient of friction make it suitable for components subjected to constant stress and wear. With a precise thickness of 0.114 inches, a length of 45 inches, and a width of 27 inches, this sheet provides ample material for custom fabrication of gears, bearings, wear pads, and other critical engineering parts. Its excellent chemical resistance further enhances its suitability for various environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and well-lit. 2. Accurately measure and mark the required dimensions on the Nylon sheet using a suitable marking tool. 3. Employ appropriate cutting tools (e.g., band saw, CNC router with a sharp bit designed for plastics) to achieve precise cuts, maintaining a consistent feed rate to prevent melting or chipping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect cutting tools, leading to poor edge quality and potential material damage. | Utilize sharp, purpose-built cutting tools for plastics and maintain optimal feed rates and speeds to ensure clean cuts and preserve material integrity. |
| Improper storage leading to warping or contamination of the Nylon sheet. | Store the Nylon sheet flat in a cool, dry environment away from direct sunlight and excessive humidity to maintain its dimensional stability and surface finish. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Industrial Gears and Sprockets, Wear Strips and Bushings, Protective Liners and Guards, Custom Machined Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||