This high-performance Nylon Stock Sheet, measuring 0.905" x 16" x 48", offers exceptional durability and wear resistance. Ideal for robust material handling applications requiring superior strength and impact absorption.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.905" |
| Length | 16" |
| Width | 48" |
Precision-manufactured to tight tolerances, this 0.905-inch thick Nylon Stock Sheet provides superior mechanical properties for demanding industrial environments. Its substantial 16-inch width and 48-inch length offer ample material for custom fabrication. Exhibiting high tensile strength, excellent abrasion resistance, and good impact toughness, this nylon stock is engineered to withstand significant loads and repeated stress. It is an ideal substrate for wear strips, chute liners, guide rails, and custom mechanical components in material handling systems, ensuring extended service life and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately mark and drill mounting holes as per design specifications, allowing for thermal expansion if necessary. 3. Secure the nylon stock sheet using appropriate fasteners, ensuring even pressure distribution to prevent warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress concentration and potential cracking. | Use a torque wrench and apply fasteners evenly to manufacturer-recommended torque values, or consider slotted holes for expansion. |
| Not accounting for material expansion and contraction due to temperature changes. | Incorporate expansion gaps or slots in the mounting design where significant temperature fluctuations are expected. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Chute and Hopper Liners, Impact Plates and Bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||