This robust Nylon Stock Sheet offers exceptional durability and wear resistance, making it ideal for custom pneumatic components. Its dimensional stability ensures reliable performance in high-pressure environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.927" |
| Length | 45" |
| Width | 19" |
Specified by design engineers worldwide, this Nylon Stock Sheet (0.927" thickness, 45" length, 19" width) is manufactured from high-grade Nylon 6, renowned for its excellent mechanical strength, abrasion resistance, and low coefficient of friction. This material is inherently self-lubricating and exhibits good chemical resistance, making it suitable for a wide array of pneumatic cylinder components, seals, wear pads, and internal structural elements where consistent performance under varying pressures and temperatures is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately machine the Nylon Stock Sheet to the required component dimensions using appropriate cutting and shaping tools. 2. Deburr all edges to prevent material fraying and ensure a smooth finish. 3. Perform dimensional verification and quality checks before integration into the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper machining leading to stress concentrations or dimensional inaccuracies. | Utilize sharp, well-maintained tooling and follow recommended machining parameters for Nylon to avoid excessive heat buildup and stress. |
| Over-tightening fasteners, which can cause deformation or cracking in Nylon components. | Apply torque specifications appropriate for Nylon, allowing for its slight flexibility and potential creep under sustained load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pneumatic cylinder components, Wear pads and guides, Sealing elements in pneumatic actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||