This robust 0.777-inch thick Nylon stock sheet offers exceptional durability and wear resistance, making it ideal for fabricating custom components in high-pressure pneumatic systems.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.777" |
| Length | 18" |
| Width | 28" |
Trusted by engineers across multiple sectors, this 0.777" thick Nylon stock sheet (18" x 28") is engineered for superior performance in demanding pneumatic environments. Its inherent toughness, excellent abrasion resistance, and low coefficient of friction make it an ideal material for wear pads, seals, bushings, and custom manifold components within pneumatic circuitry. The material's resilience to impact and chemical resistance further ensure long-term operational integrity and reliability in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the desired component dimensions using appropriate cutting tools. 2. Machine or drill features into the cut material as per design specifications. 3. Ensure all mating surfaces are clean and free of debris before assembly into the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, high-speed steel or carbide-tipped tooling specifically designed for cutting nylon to ensure clean, precise edges. |
| Over-tightening fasteners, causing stress concentrations and potential material cracking. | Employ proper torque values for fasteners and consider using washers or backing plates to distribute load evenly across the nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Pneumatic Manifolds, Wear Strips and Bushings, Seals and Gaskets, Actuator Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||