This robust Nylon stock sheet offers superior durability and resilience for a wide range of fabricating needs. Its substantial thickness and material strength make it ideal for heavy-duty components and high-wear environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.392" |
| Length | 42" |
| Width | 13" |
Manufactured under strict quality controls, this 0.392" thick Nylon stock sheet provides exceptional mechanical properties. Its high tensile strength, excellent impact resistance, and low coefficient of friction ensure reliable performance in demanding applications. The dimensions of 42" length by 13" width allow for efficient material utilization in custom machining and fabrication projects, offering a balance of strength and machinability for gears, bearings, wear pads, and structural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Prepare mating surfaces for assembly, ensuring they are clean and free from contaminants. 3. Secure the fabricated Nylon component using fasteners or adhesives suitable for the intended application and operating environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to chipping or delamination of the Nylon sheet. | Utilize sharp, carbide-tipped cutting tools specifically designed for plastics to ensure clean cuts and prevent material damage. |
| Over-tightening fasteners, which can cause stress concentration and cracking in the Nylon. | Employ appropriate torque specifications for fasteners and consider using washers to distribute load evenly across the Nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Pads and Bushings, Gears and Sprockets, Custom Machine Components, Impact Plates, Chute Liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||