This robust Nylon stock sheet offers superior tensile strength and excellent wear resistance. Precisely manufactured to meet demanding industrial applications, it provides a durable and versatile material for custom-engineered solutions.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.337" |
| Length | 42" |
| Width | 32" |
Specified by design engineers worldwide, this 0.337-inch thick Nylon stock sheet provides exceptional mechanical properties for critical applications. Its dimensions of 42 inches in length and 32 inches in width allow for efficient material utilization in custom fabrication. Nylon's inherent characteristics, including high impact strength, good chemical resistance, and low coefficient of friction, make it suitable for a broad range of uses from wear pads and guides to electrical insulators and structural components. This material is chosen for its reliability and longevity in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the required dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools, such as industrial saws or routers, with adequate cooling to prevent material degradation. 3. Secure the fabricated Nylon component using suitable fasteners or adhesives, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking tools without proper cooling. | Employ cutting tools designed for plastics with a high tooth count and ensure continuous coolant application to avoid melting and edge chipping. |
| Over-tightening fasteners, leading to stress cracks. | Use appropriate torque settings and consider incorporating washers or grommets to distribute pressure evenly across the Nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Wear Strips and Bushings, Protective Guards and Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||