This industrial-grade Nylon stock sheet offers exceptional strength, wear resistance, and excellent machinability. Its robust properties make it ideal for a wide range of manufacturing and repair applications where durability is paramount.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.395" |
| Length | 25" |
| Width | 21" |
Precision-manufactured to tight tolerances, this Nylon stock sheet measures 0.395 inches in thickness, 25 inches in length, and 21 inches in width. Composed of high-performance nylon, it exhibits superior tensile strength, abrasion resistance, and a low coefficient of friction. This material is well-suited for fabrication of wear pads, gears, bushings, and structural components requiring excellent mechanical performance and resistance to chemicals and impact.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Utilize appropriate cutting tools designed for plastics, such as carbide-tipped saws or routers. 3. Finish edges smoothly to prevent stress concentrations and improve performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for plastics, leading to melting or chipping. | Employ specialized tooling with appropriate rake angles and cooling to achieve clean cuts and prevent material degradation. |
| Improper clamping that causes stress fractures during machining. | Use generous support and avoid over-tightening clamps, distributing pressure evenly across the sheet. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Custom Bushings and Bearings, Gears and Sprockets, Protective Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||