This robust Nylon Stock Sheet is engineered for superior performance in demanding abrading and polishing applications. Its exceptional durability and precise dimensions ensure consistent results in industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.704" |
| Length | 41" |
| Width | 15" |
Built to exacting engineering tolerances, this Nylon Stock Sheet boasts a substantial 0.704" thickness, a generous 41" length, and a 15" width. Manufactured from high-grade nylon, it exhibits excellent wear resistance, low friction, and impact strength, making it ideal for custom fabrication of wear pads, guides, and specialized polishing tools. Its machinability allows for precise shaping to meet intricate design requirements for abrasive media or protective components in high-stress environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., bandsaw, router) for precise shaping. 3. Finish edges with deburring tools for a smooth profile.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overheating during machining, leading to melting or warping. | Employ sharp cutting tools and maintain adequate cooling (e.g., compressed air, coolant) during fabrication. |
| Using incorrect adhesives for bonding, resulting in delamination. | Consult material compatibility charts and use industrial-grade adhesives specifically recommended for nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and bearing surfaces, Specialized polishing and buffing tools, Protective guards and guides in abrasive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||