This high-density Nylon stock sheet, measuring 0.453" thick, 19" in length, and 34" in width, is engineered for superior performance in demanding abrading and polishing applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.453" |
| Length | 19" |
| Width | 34" |
Engineered for reliability and performance, this Nylon stock sheet exhibits exceptional wear resistance, low friction coefficient, and excellent impact strength. Its precise dimensions of 0.453" thickness, 19" length, and 34" width make it ideal for custom fabrication of wear pads, guides, and polishing surfaces. The inherent properties of Nylon allow for effective material removal and surface finishing across a wide range of substrates. This material is suitable for both manual and automated abrading and polishing processes, offering consistent results.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Determine the required dimensions for the intended application and mark the Nylon stock sheet accordingly. 2. Carefully cut the sheet using appropriate industrial cutting tools, ensuring clean edges. 3. Secure the fabricated component to the substrate using suitable fasteners or adhesives, adhering to application-specific mounting requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to rough edges and potential material stress. | Employ sharp, high-quality cutting blades specifically designed for plastics to ensure clean cuts and preserve material integrity. |
| Overheating the material during cutting or shaping, causing deformation. | Utilize appropriate cooling methods during machining, such as air jets or cutting fluids, to manage heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads for machinery, Polishing and buffing fixtures, Guide rails and chute liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||