This durable 0.027-inch thick Nylon stock sheet offers superior impact resistance and chemical inertness. Its precise dimensions make it suitable for a wide range of custom fabrication and protective applications in industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.027" |
| Length | 33" |
| Width | 18" |
Precision-manufactured to tight tolerances, this 0.027" thick Nylon stock sheet measures 33" in length and 18" in width. Composed of high-performance polyamide, it exhibits excellent tensile strength, abrasion resistance, and low friction properties. Its inherent toughness and resistance to common industrial solvents and oils make it an ideal material for wear pads, custom gaskets, protective barriers, and electrical insulation components where reliability under demanding conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work surface is clean and free of debris. 2. Accurately measure and mark the desired dimensions for cutting. 3. Utilize appropriate cutting tools (e.g., industrial shear, laser cutter) to achieve precise shapes from the stock sheet.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or rough edges. | Employ sharp, purpose-built cutting tools designed for plastic sheeting to ensure clean, precise cuts. |
| Overheating the nylon during cutting, causing melting and compromising material integrity. | Maintain appropriate cutting speeds and feed rates, and use cooling methods if necessary to prevent excessive heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Gaskets and Seals, Wear Strips and Bushings, Protective Liners and Barriers, Electrical Insulation Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||