This robust 0.642" thick Nylon stock sheet provides exceptional durability and load-bearing capacity. Its high-performance material makes it ideal for custom fabrication of wear pads, guides, and impact surfaces in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.642" |
| Length | 36" |
| Width | 20" |
A proven choice for industrial professionals, this 0.642" thick Nylon stock sheet delivers superior performance characteristics. Engineered for high impact strength and excellent abrasion resistance, it effectively withstands the rigors of material handling. The generous 36" length and 20" width allow for versatile customization into components such as chute liners, wear strips, conveyor components, and protective guards, minimizing friction and extending equipment lifespan under heavy operational loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the mounting surface thoroughly. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated Nylon component to the intended location using suitable mechanical fasteners or adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to rough edges and potential material stress. | Employ sharp, high-quality cutting tools specifically designed for plastics or composites to ensure clean, precise cuts. |
| Over-tightening fasteners, which can cause stress concentrations and crack the Nylon material. | Use appropriate torque settings for fasteners and consider incorporating washers to distribute pressure evenly across the mounting surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and strips, Chute and slide liners, Conveyor guide rails, Impact bumpers, Custom fabricated components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||