This robust Nylon stock sheet provides exceptional electrical insulation and mechanical integrity. Its substantial thickness and broad dimensions make it ideal for demanding applications in the electrical and lighting sectors.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.954" |
| Length | 19" |
| Width | 32" |
A high-performance industrial component, this Nylon stock sheet offers superior dielectric strength, excellent wear resistance, and good impact absorption, making it an ideal choice for electrical insulation and mechanical components. With precise dimensions of 0.954 inches thick, 19 inches in length, and 32 inches in width, it is manufactured from high-grade Nylon, ensuring consistent performance and reliability in challenging environments. Its thermal stability and resistance to chemicals further enhance its suitability for a wide array of industrial applications where durability and safety are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly to remove any dust or debris. 2. Measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut Nylon sheet to the surface using suitable mechanical fasteners or adhesives, ensuring a stable installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can cause delamination or uneven edges. | Utilize sharp, industrial-grade cutting blades specifically designed for plastics or nylon to ensure clean and precise cuts. |
| Over-tightening fasteners, leading to stress cracks or deformation of the nylon sheet. | Apply fasteners with appropriate torque, using washers if necessary, to distribute pressure evenly and prevent localized stress. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical insulation barriers and panels, Custom fabricated components for lighting fixtures, Mechanical supports and spacers in electrical enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||