This premium Nylon stock sheet offers exceptional strength and wear resistance for demanding machining and fabrication tasks. Its precise dimensions ensure accurate component creation for a variety of industrial applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.461" |
| Length | 13" |
| Width | 29" |
Built to exacting engineering tolerances, this Nylon stock sheet provides a consistent and reliable material base for critical components. Measuring 0.461 inches thick, 13 inches in length, and 29 inches in width, it exhibits superior tensile strength, excellent abrasion resistance, and good chemical inertness. These properties make it an ideal choice for manufacturing gears, bearings, bushings, wear pads, and other high-stress parts that require durability and low friction in industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the Nylon stock sheet using a suitable marking tool. 2. Utilize a high-speed saw with a fine-tooth blade (e.g., carbide-tipped) suitable for plastics to make precise cuts. 3. Deburr edges carefully to remove any sharp fragments, ensuring a clean finish for subsequent operations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect saw blade, leading to melting or chipping. | Employ a sharp, high-speed saw blade specifically designed for cutting plastics to prevent heat buildup and achieve clean cuts. |
| Improper clamping, causing vibration and inaccurate cuts. | Securely clamp the Nylon stock sheet to the cutting surface to minimize vibration and ensure precise dimension control. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Machined Components, Wear Strips and Bushings, Gears and Rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||