This premium Nylon Stock Sheet offers exceptional durability and a low coefficient of friction. Its robust material properties make it ideal for custom fabrication of wear pads, gears, and protective components in demanding environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.526" |
| Length | 43" |
| Width | 28" |
Specified by design engineers worldwide, this Nylon Stock Sheet boasts a nominal thickness of 0.526 inches, a generous length of 43 inches, and a width of 28 inches. Manufactured from high-grade nylon, it exhibits excellent mechanical strength, remarkable abrasion resistance, and superior impact toughness, even at sub-zero temperatures. Its inherent chemical inertness provides resistance to a wide range of solvents and lubricants, ensuring longevity in corrosive industrial settings. This material is readily machinable, allowing for precise fabrication of complex shapes and components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the substrate surface thoroughly. 2. Precisely cut the nylon sheet to the required dimensions using appropriate tooling. 3. Secure the fabricated component using recommended fasteners or adhesives, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers. | Employ carbide-tipped saw blades or routers specifically designed for cutting nylon to prevent melting and ensure clean edges. |
| Over-tightening fasteners, leading to stress cracking. | Utilize washers to distribute pressure and torque fasteners to the manufacturer's recommended specifications for nylon to avoid material deformation or fracture. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Wear Components, Protective Liners and Bushings, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||