This robust Nylon stock sheet, measuring 0.207" x 21" x 17", is engineered for demanding abrading and polishing tasks. Its superior durability and wear resistance make it an ideal choice for industrial finishing processes.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.207" |
| Length | 21" |
| Width | 17" |
Manufactured under strict quality controls, this Nylon stock sheet exhibits exceptional toughness and abrasion resistance, crucial for high-performance finishing operations. With precise dimensions of 0.207 inches thickness, 21 inches length, and 17 inches width, it offers consistent performance for a variety of abrasive and polishing applications. The inherent properties of Nylon, including its low coefficient of friction and excellent chemical resistance, ensure extended service life and reliable results in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Secure the cut piece firmly to the substrate or tool using suitable adhesives or mechanical fasteners. 3. Ensure the surface is clean and free from debris before application for optimal performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive heat during cutting, which can melt the Nylon and create a rough edge. | Utilize sharp cutting tools and maintain a moderate cutting speed to prevent overheating. |
| Applying the sheet with insufficient adhesive, leading to premature detachment. | Ensure thorough and even application of a high-strength adhesive recommended for Nylon substrates. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Surface finishing and deburring, Polish and buffing wheels, Wear pads and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||