This high-density Nylon stock sheet is engineered for demanding pneumatic systems. Its robust material properties ensure exceptional durability, wear resistance, and dimensional stability for custom component fabrication.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.820" |
| Length | 41" |
| Width | 31" |
Precision-manufactured to tight tolerances, this 0.820-inch thick Nylon stock sheet measures 41 inches in length and 31 inches in width. Composed of high-grade Nylon 6/6, it offers excellent tensile strength, abrasion resistance, and a low coefficient of friction, making it ideal for fabricating wear pads, seals, and custom manifold components in pneumatic cylinders, valves, and air preparation units. Its inherent toughness and resistance to moisture absorption ensure consistent performance in dynamic environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired component dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., bandsaw, CNC router) for precise material removal. 3. Finish edges and surfaces as required for the specific application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or rough edges. | Employ sharp, carbide-tipped blades specifically designed for cutting Nylon to ensure clean, precise cuts and minimize heat buildup. |
| Overheating the material during machining, causing deformation or loss of material properties. | Utilize appropriate feed rates and cooling methods (e.g., air blast, cutting fluid) during machining to manage heat generation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder components (e.g., wear bands, piston seals), Valve seals and guides, Custom manifold fabrication, Bearing surfaces in pneumatic equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||