This robust Nylon stock sheet offers superior wear resistance and mechanical strength. Its precise dimensions and durable material make it ideal for custom fabrication, components, and industrial tooling.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.871" |
| Length | 47" |
| Width | 36" |
Built to exacting engineering tolerances, this 0.871-inch thick Nylon stock sheet measures 47 inches in length and 36 inches in width. Composed of high-grade Nylon 6/6, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction. This material is specifically chosen for its ability to withstand heavy loads, impact, and continuous operation in demanding industrial environments, making it suitable for fabricating wear pads, bushings, gears, and structural components where durability and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark cut lines on the Nylon stock sheet using a reliable marking tool. 2. Utilize a suitable saw blade (e.g., a carbide-tipped blade designed for plastics) to make clean and precise cuts, ensuring adequate cooling to prevent melting. 3. Deburr all cut edges using a file or deburring tool to achieve a smooth finish and remove any sharp or rough edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a blade not designed for plastics, leading to melting and rough cuts. | Employ a carbide-tipped or specialized plastic cutting blade, and maintain a consistent feed rate with cooling if necessary. |
| Failing to account for material expansion/contraction due to temperature changes during fabrication. | Allow for slight tolerances in measurements and consider the operational temperature range when designing components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Pads and Strips, Custom Bushings and Bearings, Gears and Sprockets, Chute Liners, Impact Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||