This robust Nylon stock sheet is engineered for high-performance pneumatic systems. Its exceptional strength and dimensional stability make it ideal for custom fabrication of components requiring superior wear resistance and impact toughness.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.543" |
| Length | 41" |
| Width | 19" |
Specified by design engineers worldwide, this Nylon stock sheet offers an optimal balance of mechanical properties for demanding pneumatic applications. With a substantial thickness of 0.543 inches, a generous length of 41 inches, and a width of 19 inches, it provides ample material for intricate component fabrication. The high-tensile strength and excellent abrasion resistance of Nylon ensure longevity and reliable performance under continuous operational stress, making it a preferred choice for seals, wear pads, and custom fittings within pneumatic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the Nylon stock sheet according to design specifications. 2. Employ appropriate cutting tools designed for plastics to achieve precise shapes and smooth edges. 3. Deburr all cut edges to prevent material stress and ensure proper fitment in subsequent assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to chipping or melting. | Utilize high-speed steel or carbide-tipped cutting tools with adequate lubrication and cooling to prevent thermal degradation and achieve clean cuts. |
| Over-tightening fasteners, causing stress concentration and potential cracking. | Employ torque-limiting tools and consider using washers or larger-diameter holes to distribute load and avoid exceeding the material's compressive strength. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pneumatic cylinder components, Wear pads and guides in pneumatic actuators, Seals and gaskets for high-pressure pneumatic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||