This robust Nylon stock sheet offers exceptional durability and controlled abrasion. Its dense composition makes it ideal for precision polishing and surface finishing in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.689" |
| Length | 12" |
| Width | 27" |
Manufactured under strict quality controls, this 0.689" thick Nylon stock sheet exhibits superior wear resistance and low coefficient of friction. Its dimensions of 12" x 27" provide ample material for custom fabrication. The inherent toughness and self-lubricating properties of Nylon make it an excellent choice for applications requiring resistance to chemicals, solvents, and impact, ensuring extended service life in abrasive and polishing operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the substrate surface thoroughly to remove any debris or contaminants. 2. Cut the Nylon stock sheet to the desired dimensions using appropriate cutting tools for polymers. 3. Securely affix the Nylon sheet to the application surface using industrial-grade adhesives or mechanical fasteners, ensuring a flush and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient adhesive or fasteners, leading to delamination or movement. | Employ industrial-grade adhesives specifically rated for Nylon or utilize appropriate mechanical fasteners with washers to distribute load. |
| Incorrectly cutting the Nylon, resulting in rough edges or imprecise dimensions. | Utilize sharp cutting tools designed for plastics, such as carbide-tipped saws or routers, and maintain consistent feed rates to achieve clean cuts. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Precision polishing of metal components, Surface preparation for coatings and adhesives, Custom wear pads and guide components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||