This high-grade Nylon stock sheet offers superior self-lubricating properties and exceptional wear resistance. Precisely manufactured to reduce friction and extend component lifespan in demanding industrial settings.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.587" |
| Length | 13" |
| Width | 20" |
Designed for demanding industrial environments, this Nylon stock sheet boasts a substantial 0.587" thickness, ensuring robust performance under significant load. Its inherent lubricity minimizes friction and wear, making it ideal for sliding components, bearings, and wear pads. The material's excellent mechanical strength, chemical resistance, and low coefficient of friction contribute to extended service life and reduced maintenance requirements in diverse operational conditions, from material handling to heavy machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the mounting surface thoroughly. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut piece to the intended application using suitable mechanical fasteners or adhesives, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers. | Employ sharp, carbide-tipped blades specifically designed for cutting plastics to prevent chipping and melting. |
| Over-tightening fasteners, leading to material deformation. | Use washers and torque fasteners to the manufacturer's recommended specifications to avoid excessive stress on the Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Self-lubricating bearings, Bushings and slide components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||