This robust Nylon stock sheet delivers exceptional lubricating properties and wear resistance. Its substantial 0.714-inch thickness provides superior structural integrity for demanding industrial components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.714" |
| Length | 14" |
| Width | 32" |
Engineered for reliability and performance, this 0.714" thick Nylon stock sheet boasts a length of 14" and a width of 32". Manufactured from high-grade Nylon, it exhibits excellent self-lubricating characteristics, low coefficient of friction, and superior abrasion resistance. These properties make it ideal for applications requiring reduced wear and smooth operation, such as bearing surfaces, wear pads, guides, and custom-machined components in material handling, automotive, and manufacturing equipment. Its dimensional stability ensures consistent performance under varying load and environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely machine the Nylon stock sheet to the required dimensions using appropriate cutting and shaping tools. 2. Ensure all mating surfaces are clean, dry, and free from debris. 3. Securely fasten the machined Nylon component using appropriate fasteners, avoiding overtightening to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining too close to the edge without adequate support. | Utilize proper clamping techniques and support structures during machining to prevent chipping or cracking, especially on thin sections. |
| Using standard fasteners without considering Nylon's thermal expansion. | Incorporate slotted holes or expansion joints where necessary to accommodate thermal expansion and contraction, preventing stress build-up. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Bearing Surfaces, Wear Pads and Strips, Custom Bushings and Rollers, Chute Liners, Guide Rails.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||