This Nylon stock sheet provides exceptional strength, wear resistance, and chemical inertness. Precisely manufactured to meet stringent industrial requirements, it's an ideal raw material for custom component fabrication.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.089" |
| Length | 35" |
| Width | 19" |
Specified by design engineers worldwide, this Nylon stock sheet offers a robust solution for demanding applications. With precise dimensions of 0.089 inches thickness, 35 inches length, and 19 inches width, it meets critical manufacturing tolerances. Nylon's inherent properties, including high tensile strength, excellent abrasion resistance, and good chemical resilience, make it suitable for a wide range of mechanical components, wear pads, and protective elements. Its machinability allows for intricate designs and tight fits in specialized equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of contaminants. 2. Accurately cut the nylon sheet to the required dimensions using appropriate tooling. 3. Secure the fabricated component using specified fasteners or adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to poor edge quality. | Employ sharp, carbide-tipped blades or specialized plastic routing bits for clean cuts and minimal stress on the material. |
| Overheating the material during machining, causing melting or deformation. | Utilize appropriate feed rates and cooling methods (e.g., air blast) to maintain optimal machining temperatures. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Custom Machined Parts, Protective Covers and Guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||