This premium Nylon stock sheet offers exceptional durability and mechanical strength. Its robust composition makes it ideal for a wide range of demanding industrial applications where reliability is paramount.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.484" |
| Length | 28" |
| Width | 44" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a nominal thickness of 0.484 inches, a length of 28 inches, and a width of 44 inches. Its excellent tensile strength, high abrasion resistance, and superior impact strength are characteristic of high-grade Nylon 6/6. This material exhibits good chemical resistance to solvents and oils. It is precisely fabricated to meet stringent dimensional tolerances, ensuring consistency for machining and fabrication. Suitable for wear pads, bushings, gears, and structural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate for optimal adhesion or mounting. 2. Cut the Nylon stock sheet to the required dimensions using appropriate machining tools. 3. Secure the fabricated part using recommended fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for dense plastics. | Utilize sharp, high-speed steel or carbide-tipped tooling designed for machining Nylon to prevent melting and ensure clean cuts. |
| Over-tightening fasteners, causing stress concentrations. | Apply fasteners with appropriate torque settings and consider using washers to distribute load evenly across the Nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Custom Machined Parts, Protective Covers and Shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||