This premium Nylon stock sheet provides exceptional durability and wear resistance. Precisely manufactured to demanding specifications, it's ideal for fabricating custom components, tooling, and wear surfaces in industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.662" |
| Length | 36" |
| Width | 33" |
Specified by design engineers worldwide, this 0.662-inch thick Nylon stock sheet offers a robust solution for demanding applications. Its dimensions of 36 inches in length and 33 inches in width allow for efficient fabrication of custom parts. Composed of high-performance Nylon, it exhibits excellent tensile strength, impact resistance, and low friction properties, making it suitable for wear pads, bushings, gears, and protective components in machinery and equipment where durability and minimal wear are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired dimensions on the Nylon stock sheet using a suitable marking tool. 2. Utilize appropriate cutting tools designed for plastic, such as a band saw or CNC router, to achieve precise cuts. 3. Smooth any rough edges with sandpaper or a deburring tool to ensure a clean finish and prevent potential snagging.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking blades for cutting, leading to melting or chipping of the Nylon. | Employ blades with a higher tooth count and slower feed rate, specifically designed for cutting plastics, to ensure clean and precise cuts without material degradation. |
| Over-tightening fasteners during assembly, which can cause stress cracking in the Nylon. | Use washers and do not overtighten fasteners. Allow for slight expansion and contraction of the Nylon due to temperature changes. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and guides, Self-lubricating bushings and bearings, Protective guards and impact absorbers, Gears and sprockets in low-load applications, Tooling and fixture components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||