Engineered for demanding environments, this robust Nylon stock sheet offers exceptional durability and low friction. Its precise dimensions and superior material properties make it ideal for various material handling solutions.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.981" |
| Length | 45" |
| Width | 34" |
Manufactured under strict quality controls, this Nylon stock sheet features a precise thickness of 0.981 inches, a length of 45 inches, and a width of 34 inches. Composed of high-grade Nylon 6/6, it exhibits outstanding tensile strength, excellent abrasion resistance, and a low coefficient of friction, minimizing wear and tear on both the sheet and materials it interfaces with. This material is ideal for applications requiring impact resistance and chemical inertness, ensuring long-term performance in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from debris. 2. Accurately measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using mechanical fasteners or a suitable industrial adhesive, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or fastener failure. | Thoroughly clean and dry the mounting surface before installation. Use a degreaser if necessary. |
| Over-tightening fasteners, which can cause stress cracking in the Nylon. | Use appropriate torque specifications for fasteners. Consider using washers to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Chute and liner applications, Custom fabrication for material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||