This robust Nylon stock sheet offers superior tensile strength and wear resistance, ideal for fabricating custom components in suspending and bracing applications. Its high-performance properties ensure reliability in challenging industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.992" |
| Length | 13" |
| Width | 26" |
Designed for demanding industrial environments, this Nylon stock sheet (0.992" thickness, 13" length, 26" width) exhibits exceptional mechanical properties including high tensile strength, excellent abrasion resistance, and good impact strength. The inherent lubricity of nylon minimizes friction, making it suitable for dynamic applications. This material is widely used in the fabrication of custom brackets, wear pads, and structural supports where durability and load-bearing capacity are critical, outperforming many metals in corrosive or high-vibration conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and mark cutting lines on the Nylon stock sheet according to the design specifications. 2. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) to achieve clean, accurate cuts. Ensure proper ventilation and safety equipment. 3. Fabricate mounting holes or attachment points using precision drilling or machining techniques, ensuring tolerances are maintained for secure installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or chipping. | Employ carbide-tipped blades or specialized plastic cutting tools designed for high-speed, low-heat cutting of Nylon. Maintain consistent feed rates. |
| Over-tightening fasteners, causing stress concentration and potential material cracking. | Use washers to distribute load and torque fasteners to the manufacturer's recommended specifications for Nylon components. Avoid direct metal-to-Nylon contact where possible. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Brackets and Mounts, Wear Strips and Bushings, Protective Guards and Bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||