This robust Nylon Stock Sheet offers exceptional durability and wear resistance for rigorous abrading and polishing tasks in demanding industrial settings. Its large dimensions provide ample material for custom fabrication.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.970" |
| Length | 21" |
| Width | 39" |
Designed for demanding industrial environments, this Nylon Stock Sheet provides superior performance in abrasive and polishing applications. Manufactured from high-grade nylon, it exhibits excellent tensile strength, impact resistance, and a low coefficient of friction. The material's inherent lubricity minimizes heat buildup during operation. With precise dimensions of 0.970 inches thick, 21 inches in length, and 39 inches in width, this sheet is optimized for cutting, shaping, and fabrication into custom components such as wear pads, guide rails, and protective surfaces.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., band saw, router) for precise fabrication. 3. Securely fasten the fabricated nylon component to the target surface using suitable mechanical fasteners or adhesives, ensuring alignment and proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that generate excessive heat, leading to melting or deformation of the nylon. | Employ sharp, appropriate cutting tools designed for plastics and ensure adequate cooling during the cutting process to prevent thermal degradation. |
| Over-tightening fasteners, which can cause stress concentration and potential cracking of the nylon material. | Use washers and tighten fasteners to a recommended torque specification, avoiding excessive force and allowing for slight thermal expansion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and bearing surfaces, Protective liners for chutes and hoppers, Guide rails and rollers in material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||