This 0.190" thick Nylon Stock Sheet provides robust performance in suspending and bracing applications. Its superior strength-to-weight ratio and resistance to wear make it an ideal industrial material.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.190" |
| Length | 39" |
| Width | 39" |
Built to exacting engineering tolerances, this 0.190" thick Nylon Stock Sheet, measuring 39" by 39", offers exceptional mechanical strength and abrasion resistance. Nylon's inherent properties, including good impact strength and chemical resistance to many oils, greases, and solvents, make it a reliable choice for demanding industrial environments. The material's low coefficient of friction also contributes to its suitability for dynamic load-bearing scenarios in suspending and bracing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Drill mounting holes as per design specifications, ensuring clean edges. 3. Securely fasten the sheet to the intended structure using appropriate hardware, verifying load capacity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate fasteners that cannot support the load. | Always select fasteners rated for the anticipated load and compatible with nylon to prevent stress concentrations. |
| Over-tightening fasteners, leading to material deformation or cracking. | Apply torque evenly and within the recommended range for nylon to avoid compromising the sheet's integrity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Bracing Components, Support Structures, Grommets and Bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||