This robust Nylon stock sheet offers exceptional strength and durability. Its substantial 0.897-inch thickness makes it ideal for demanding fabrication projects requiring superior impact resistance and load-bearing capabilities.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.897" |
| Length | 28" |
| Width | 35" |
Manufactured under strict quality controls, this Nylon stock sheet measures 0.897 inches in thickness, 28 inches in length, and 35 inches in width. Composed of high-performance Nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction. These properties make it well-suited for applications involving wear, friction, and moderate to heavy loads. Its dimensional stability ensures consistent performance in various environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended surface is clean, dry, and free from debris. 2. Accurately measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using suitable fasteners or adhesives, ensuring a firm and stable installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense plastics. | Employ sharp, high-speed steel or carbide-tipped cutting tools specifically designed for machining Nylon to prevent chipping and ensure clean cuts. |
| Over-tightening fasteners, causing material stress. | Utilize washers and avoid excessive torque when fastening to prevent stress concentrations and potential cracking or deformation of the Nylon sheet. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Impact-resistant components, Protective liners, Tooling and jigs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||