This robust Nylon stock sheet offers exceptional durability and low friction for demanding material handling. Its precise dimensions and superior material properties make it ideal for custom fabrication and high-wear environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.575" |
| Length | 24" |
| Width | 46" |
Specified by design engineers worldwide, this Nylon stock sheet features a nominal thickness of 0.575 inches, a length of 24 inches, and a width of 46 inches. Composed of high-grade nylon, it exhibits excellent abrasion resistance, impact strength, and a low coefficient of friction, making it suitable for sliding surfaces, wear pads, and custom-engineered components in material handling systems. Its inherent toughness ensures longevity in rigorous operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove debris. 2. Precisely measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated Nylon component using fasteners suitable for the application and substrate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, which can cause stress concentration and cracking in the nylon. | Use torque-limiting tools and ensure fasteners are snug but not excessively tight. |
| Using incompatible adhesives or solvents that can degrade the nylon's structural integrity. | Consult the material manufacturer's compatibility guide for approved adhesives and cleaning agents. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear strips and guides, Chute liners and slide surfaces, Impact plates and bumper components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||