This robust Nylon stock sheet offers exceptional wear resistance and low friction, making it a superior choice for custom-engineered material handling components and wear pads.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.328" |
| Length | 31" |
| Width | 14" |
Specified by design engineers worldwide, this 0.328-inch thick Nylon stock sheet (31" length x 14" width) provides excellent tensile strength, impact resistance, and self-lubricating properties. Its high abrasion resistance ensures longevity in demanding environments, while its excellent machinability allows for precise fabrication of critical components. Ideal for chutes, liners, rollers, and wear strips in material handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Prepare mounting surfaces ensuring they are clean and free of debris. 3. Secure the fabricated Nylon component using suitable fasteners or adhesives, ensuring a snug fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrectly selecting a thinner gauge for high-load applications. | Always verify the required load-bearing capacity and select a Nylon stock sheet thickness that meets or exceeds these specifications. |
| Over-tightening fasteners, potentially cracking the Nylon. | Use washers and avoid excessive torque when fastening Nylon components. Allow for thermal expansion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Chute Liners, Rollers and Bushings, Impact Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||