This high-performance Nylon stock sheet offers exceptional durability and strength. Its robust material properties make it ideal for demanding industrial environments requiring wear resistance and structural integrity.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.132" |
| Length | 41" |
| Width | 42" |
Manufactured under strict quality controls, this Nylon stock sheet possesses a nominal thickness of 0.132 inches, a length of 41 inches, and a width of 42 inches. Exhibiting excellent tensile strength, high abrasion resistance, and good chemical inertness, this material is well-suited for applications such as wear strips, bushings, gears, and protective coverings. Its dimensional stability and impact resistance ensure reliable performance in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free from debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 3. Securely fasten the Nylon component using mechanical fasteners or adhesive suitable for Nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that may corrode or damage the Nylon. | Utilize stainless steel or specialized plastic fasteners to prevent galvanic corrosion and ensure compatibility. |
| Over-tightening fasteners, leading to stress concentrations and potential cracking of the Nylon. | Apply fasteners to the recommended torque specifications for Nylon, using washers to distribute the load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Gears and Sprockets, Protective Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||