This robust Nylon stock sheet, measuring 0.102 inches thick, 33 inches in length, and 43 inches in width, is engineered for high-performance pneumatic systems, offering superior durability and wear resistance.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.102" |
| Length | 33" |
| Width | 43" |
Trusted by engineers across multiple sectors, this Nylon stock sheet provides exceptional mechanical strength and abrasion resistance, ideal for fabricating robust pneumatic components. Its precise dimensions (0.102" thickness, 33" length, 43" width) ensure consistent performance and easy integration into custom designs. Nylon's inherent lubricity and resistance to moisture and many chemicals make it a reliable choice for dynamic pneumatic environments, from seals and gaskets to structural elements in actuators and valve bodies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Prepare mating surfaces for bonding or mechanical fastening, ensuring cleanliness and flatness. 3. Assemble components, applying appropriate adhesives, fasteners, or welding techniques as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, carbide-tipped blades or routers specifically designed for cutting Nylon to ensure clean, precise edges. |
| Over-tightening fasteners, which can cause stress cracking or deformation of the Nylon. | Employ washers and torque-limiting tools to distribute load evenly and avoid over-compression of the Nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder components, Valve seals and gaskets, Actuator housings and wear pads.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||