This robust Nylon Stock Sheet offers exceptional durability and dimensional stability. Its precise construction makes it ideal for critical measuring, inspection, and custom fabrication tasks in industrial settings.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.902" |
| Length | 41" |
| Width | 42" |
Built to exacting engineering tolerances, this 0.902-inch thick Nylon Stock Sheet provides superior rigidity and wear resistance. Manufactured from high-grade nylon, it exhibits excellent chemical resistance and low moisture absorption, ensuring consistent performance in varied environments. The generous 41-inch length and 42-inch width allow for versatile use in creating jigs, fixtures, templates, and critical measuring surfaces where accuracy and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from debris. 2. Position the Nylon Stock Sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to maintain flatness.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing localized stress and potential warping. | Use torque-limiting tools and install fasteners in a staggered pattern, starting from the center and working outwards. |
| Inadequate edge support leading to deflection under load. | Ensure sufficient support along all edges, especially in areas of anticipated stress, and consider reinforcing as needed. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Precision measuring surfaces, Custom jig and fixture construction, Inspection templates and gauges.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||