This robust Nylon stock sheet, engineered to exacting standards, offers superior strength and wear resistance for diverse fabrication needs. Its dense polymer matrix ensures longevity in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.303" |
| Length | 17" |
| Width | 12" |
Precision-manufactured to tight tolerances, this 0.303-inch thick Nylon stock sheet measures 17 inches in length and 12 inches in width. Composed of high-grade Nylon 6/6, it exhibits excellent tensile strength, impact resistance, and a low coefficient of friction. This material's inherent lubricity and abrasion resistance make it ideal for use in wear pads, bushings, gears, and custom-machined components subjected to continuous mechanical stress and moderate chemical exposure. Its machinability allows for intricate designs and precise fitting in industrial assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free from debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated Nylon component to the intended assembly using suitable fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for hard plastics. | Employ carbide-tipped blades or specialized plastic cutting tools for clean, precise cuts without chipping or melting. |
| Over-tightening fasteners, leading to stress cracking. | Use washers to distribute load and tighten fasteners gradually to the recommended torque specifications, avoiding excessive pressure. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Custom Bushings and Bearings, Machined Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||