This premium nylon stock sheet is engineered for demanding industrial environments. Its precise dimensions and robust material properties ensure reliability and longevity in a wide range of fabrication and repair tasks.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.018" |
| Length | 22" |
| Width | 44" |
A high-performance industrial component, this nylon stock sheet is manufactured from virgin nylon, offering exceptional tensile strength and a low coefficient of friction. Its 0.018-inch thickness provides flexibility while maintaining structural integrity. The dimensions of 22 inches by 44 inches allow for versatile cutting and shaping. Nylon's inherent resistance to abrasion, chemicals, and impact makes it suitable for wear pads, custom gaskets, and protective coverings in machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and cut the nylon stock sheet to the required dimensions using appropriate cutting tools (e.g., utility knife for thinner sheets, band saw for thicker). 2. Prepare the mating surfaces for bonding or fastening, ensuring they are clean, dry, and free from debris. 3. Secure the nylon component using suitable adhesives, mechanical fasteners (screws, rivets), or by thermal forming as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive heat during cutting, leading to melting or deformation of the nylon. | Employ sharp cutting tools and appropriate speeds. For thicker sheets, consider using a band saw with a fine-tooth blade and adequate cooling. |
| Inadequate surface preparation before bonding or fastening, resulting in poor adhesion or loosening. | Thoroughly clean and degrease all surfaces with a suitable solvent before applying adhesives or fasteners. Lightly abrading the surface can also improve adhesion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Gaskets and Seals, Wear Strips and Bushings, Protective Coverings and Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||