High-performance nylon stock sheet designed for rugged pneumatic applications. Offers exceptional durability, wear resistance, and dimensional stability in challenging industrial settings.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.194" |
| Length | 32" |
| Width | 48" |
Designed for demanding industrial environments, this 0.194" thick nylon stock sheet (32" x 48") provides superior mechanical strength and excellent abrasion resistance, crucial for pneumatic component fabrication. Its high tensile strength and low coefficient of friction ensure reliable performance in high-cycle applications. Nylon's inherent toughness and resistance to oils and solvents make it an ideal material for seals, gaskets, wear pads, and custom fittings within pneumatic systems, maintaining integrity under pressure and continuous operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate cutting tools. 2. Machine or form to final part geometry, ensuring precise tolerances. 3. Install fabricated components within the pneumatic system, verifying proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for nylon, leading to rough edges or melting. | Utilize sharp, high-speed cutting tools with appropriate rake angles and coolant when cutting nylon to achieve clean, precise edges. |
| Over-tightening fasteners, which can cause stress cracking or deformation in the nylon material. | Employ proper torque specifications when fastening nylon components, utilizing washers to distribute load and avoid localized pressure points. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder seals, Wear strips and guides, Custom pneumatic fittings and adapters.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||