This high-performance Nylon stock sheet, measuring 0.431" thick by 30" wide and 20" long, offers exceptional toughness and wear resistance. It's a versatile material for custom fabrication and replacement parts in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.431" |
| Length | 30" |
| Width | 20" |
A high-performance industrial component, this Nylon stock sheet is engineered from robust nylon material, offering superior tensile strength, excellent impact resistance, and good abrasion properties. Its precise dimensions of 0.431 inches thickness, 30 inches length, and 20 inches width make it ideal for custom machining of components requiring durability and dimensional stability. The material's inherent lubricity also contributes to its suitability for wear strips, bushings, and protective elements. It exhibits good chemical resistance to many oils, greases, and solvents, further enhancing its utility in challenging industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate sawing or cutting tools. Ensure cuts are square and clean. 2. Machine or form the cut material to its final component specifications, adhering to design tolerances. 3. Install the fabricated component in its intended application, ensuring secure fastening and proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard saw blades not designed for plastics, leading to melting or rough edges. | Utilize carbide-tipped blades specifically designed for cutting plastics and nylon. Maintain appropriate cutting speeds and feed rates to prevent overheating. |
| Over-tightening fasteners, which can cause stress cracking or deformation of the nylon. | Use washers to distribute load and tighten fasteners to the manufacturer's recommended torque specifications for nylon components. Avoid overtightening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Wear Strips and Guides, Bushings and Bearings, Protective Covers and Guards, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||