This robust nylon stock sheet, measuring 0.880" x 30" x 20", provides exceptional durability and wear resistance for a wide range of industrial applications. Its superior impact strength makes it ideal for heavy-duty use.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.880" |
| Length | 30" |
| Width | 20" |
Engineered for reliability and performance, this 0.880" thick nylon stock sheet exhibits excellent impact strength, abrasion resistance, and a low coefficient of friction. Its robust composition ensures longevity in demanding environments, making it suitable for fabricating custom components such as wear pads, bearings, guides, and impact plates. The material's inherent chemical resistance further enhances its suitability for diverse industrial settings, minimizing degradation from common solvents and oils.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) to precisely cut the sheet to size. 3. Smooth any rough edges with sandpaper or a deburring tool for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or chipping. | Employ sharp, appropriate industrial saws designed for cutting plastic materials to ensure clean, precise cuts. |
| Overheating the material during cutting, causing melting and poor edge quality. | Maintain a moderate cutting speed and utilize cooling methods if necessary to prevent excessive heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Wear Pads and Strips, Protective Liners and Guards, Fabricated Bushings and Bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||