This high-performance nylon stock sheet offers exceptional durability and versatility. Its robust material properties make it ideal for a wide range of demanding industrial applications, ensuring long-lasting performance.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.994" |
| Length | 25" |
| Width | 34" |
A proven choice for industrial professionals, this nylon stock sheet boasts superior toughness and wear resistance. Precisely manufactured to dimensions of 0.994 inches thick, 25 inches in length, and 34 inches in width, it provides a substantial and reliable material for fabrication. Nylon's inherent properties, including excellent impact strength, low coefficient of friction, and resistance to chemicals and abrasion, make it suitable for a multitude of applications where durability and performance are paramount. This sheet is engineered to withstand rigorous operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired cut from the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) to make clean cuts, minimizing stress on the material. 3. Deburr and finish edges as required for the specific application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard saw blades not designed for plastic, leading to chipping or melting. | Employ carbide-tipped blades with a high tooth count for clean, efficient cuts. |
| Applying excessive heat during cutting, causing material deformation. | Maintain a consistent, moderate feed rate and ensure adequate cooling if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Wear Strips and Bushings, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||