This robust Nylon stock sheet offers exceptional wear resistance and self-lubricating properties. Its substantial 0.967" thickness provides superior strength for demanding fabrication tasks and long-term component life.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.967" |
| Length | 32" |
| Width | 35" |
Trusted by engineers across multiple sectors, this Nylon stock sheet is manufactured to exacting standards, featuring dimensions of 0.967 inches thick, 32 inches in length, and 35 inches in width. The material's inherent properties, including high tensile strength, excellent abrasion resistance, and a low coefficient of friction, make it suitable for a broad range of industrial applications. Its machinability allows for precise fabrication of custom parts, gears, bushings, and wear components that require durability and resistance to chemicals and moisture.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark the desired cut dimensions on the Nylon stock sheet. 2. Utilize a suitable saw blade (e.g., carbide-tipped) and cutting speed appropriate for plastics to achieve a clean cut. 3. Deburr edges using a fine file or router bit to ensure smooth surfaces and prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a blade designed for metal cutting, which can lead to melting and poor cut quality. | Employ a saw blade with a higher tooth count and a negative rake angle, specifically designed for cutting plastics like Nylon. |
| Applying excessive feed pressure during cutting, causing heat buildup and potential cracking. | Maintain a consistent and moderate feed rate, allowing the blade to cut efficiently without forcing it through the material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-load wear pads, Custom gears and sprockets, Bushings and bearings, Machine guards and covers, Structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||