This robust Nylon stock sheet, measuring 0.967" x 15" x 41", is engineered for high-performance pneumatic systems. Its exceptional durability and material properties ensure reliable operation in challenging industrial settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.967" |
| Length | 15" |
| Width | 41" |
Designed for demanding industrial environments, this Nylon stock sheet (0.967" x 15" x 41") offers superior tensile strength, excellent abrasion resistance, and a low coefficient of friction. Its inherent toughness makes it ideal for fabricating robust components within pneumatic systems, including wear pads, guides, and structural elements subjected to significant mechanical stress and friction. The material's resistance to oils and solvents further enhances its longevity in typical industrial atmospheres, ensuring consistent performance and extended service life in critical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions for your pneumatic component. 2. Securely fasten the fabricated part using appropriate mechanical fasteners or adhesives, ensuring proper alignment within the pneumatic system. 3. Verify the integrity of the installation and test the pneumatic system for proper functionality and leak-free operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or uneven edges. | Utilize sharp, industrial-grade cutting tools specifically designed for plastics, such as a carbide-tipped saw or a precision router, to ensure clean and accurate cuts. |
| Over-tightening fasteners, causing stress concentrations and potential material cracking. | Apply fasteners with calibrated torque wrenches to prevent over-stressing the Nylon. Consider using washers to distribute load if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides in Pneumatic Cylinders, Seals and Gaskets for High-Pressure Pneumatic Lines, Custom Fabricated Bushings and Bearings for Pneumatic Actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||