This robust Nylon stock sheet offers superior wear resistance and excellent impact strength. Engineered for demanding material handling applications, its durable composition ensures longevity and reliable performance in abrasive environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.949" |
| Length | 46" |
| Width | 47" |
Built to exacting engineering tolerances, this 0.949-inch thick Nylon stock sheet measures 46 inches in length and 47 inches in width. The high-performance nylon material exhibits exceptional tensile strength, low coefficient of friction, and superior abrasion resistance. This makes it ideal for applications requiring reduced wear and smooth operation, such as wear strips, guide rails, chute liners, and impact pads. Its inherent toughness also allows it to absorb significant shock, protecting underlying structures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Mark and drill mounting holes according to design specifications. 3. Secure the Nylon stock sheet using appropriate fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress concentrations and potential cracking. | Use washers and tighten fasteners incrementally in a star pattern to distribute load evenly. Avoid excessive torque. |
| Improperly sizing or shaping the sheet for the application, resulting in premature wear. | Consult engineering drawings and ensure the sheet's dimensions and form are optimized for the specific load and wear requirements of the application. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guide Rails, Chute Liners for Abrasive Materials, Impact Plates and Bumpers, Bearing Surfaces, Protective Coverings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||