This robust Nylon stock sheet offers exceptional wear resistance, impact strength, and low friction. Precisely manufactured for optimal performance in demanding industrial applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.949" |
| Length | 46" |
| Width | 45" |
Manufactured under strict quality controls, this 0.949 inch thick Nylon stock sheet measures 46 inches in length and 45 inches in width. Engineered from high-grade nylon, it exhibits superior tensile strength, excellent abrasion resistance, and a low coefficient of friction, making it ideal for components subjected to continuous wear and high loads. Its inherent toughness and machinability allow for precise fabrication of custom parts, bearings, gears, and wear pads in diverse industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and well-lit. 2. Securely clamp the Nylon stock sheet to prevent movement during cutting. 3. Utilize a sharp, appropriate saw blade designed for plastics to achieve a clean cut.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect saw blade, leading to chipping or melting. | Employ a sharp, high-tooth-count saw blade specifically designed for cutting nylon or plastics. Maintain a consistent cutting speed. |
| Inadequate clamping of the material, causing vibration and inaccurate cuts. | Use robust clamps to firmly secure the entire sheet against the cutting surface, minimizing any potential for movement or vibration. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Machined wear components, Bearings and bushings, Gears and sprockets, Protective wear pads.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||